 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MULTIANODE PHOTOMULTIPLIER TUBE ASSEMBLY H8711 SERIES PATENT 4 x 4 Multianode, High Speed Response, Low Cross-talk, 30 mm Square Bialkali and Multialkali Photocathode, 12-stage, Head-on Type FEATURES G4 x 4 Multianode, Anode Size: 4.2 mm x 4.2 mm / Anode GEffective Area: 18.1 mm x 18.1 mm GHigh Speed Response GLow Cross-talk: 1 % Typ. GHigh Cathode Sensitivity Luminous 200 A/lm Typ. (-01 Type) Luminous 500 A/lm Typ. (-20 Type) GWeight: Approx. 50 g APPLICATIONS GHigh Energy Physics GFlow Cytometer (-01, -20 Type) GDNA Sequencer (-01, -20 Type) Figure 1: Typical Spectral Response 100 TPMHB0738EB 100 TPMHB0739EB CATHODE RADIANT SENSITIVITY (mA/W) QUANTUM EFFICIENCY (%) 10 H8711 H8711-10 H8711-03 H8711-13 CATHODE RADIANT SENSITIVITY (mA/W) QUANTUM EFFICIENCY (%) 10 -04 TYPE -14 TYPE -01 TYPE -20 TYPE 1 1 0.1 0.1 CATHODE RADIANT SENSITIVITY QUANTUM EFFICIENCY 0.01 100 200 300 400 500 600 700 800 900 1000 CATHODE RADIANT SENSITIVITY QUANTUM EFFICIENCY 0.01 100 200 300 400 500 600 700 800 900 1000 WAVELENGTH (nm) WAVELENGTH (nm) Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. (c)2007 Hamamatsu Photonics K.K. MULTIANODE PHOTOMULTIPLIER TUBE ASSEMBLIES H8711 SERIES Spectral Response Type No. Range A B C Maximum Ratings Average Anode Output Current in Total D Supply Dynode Voltage PhotoBetween Peak Window Wavelength cathode Material Structure Anode and / Stages Material Cathode (nm) Normal Divider Type H8711 300 to 650 H8711-01 300 to 880 H8711-03 185 to 650 H8711-04 185 to 880 H8711-20 300 to 920 Taper Divider Type H8711-10 300 to 650 H8711-11 300 to 880 H8711-13 185 to 650 H8711-14 185 to 880 (nm) 420 420 420 420 530 420 420 420 420 BA MA BA MA MA BA MA BA MA K K U U K K K U U MC/12 MC/12 MC/12 MC/12 MC/12 MC/12 MC/12 MC/12 MC/12 (V) -1000 -1000 -1000 -1000 -1000 -1000 -1000 -1000 -1000 (mA) 0.017 0.017 0.017 0.017 0.017 0.017 0.017 0.017 0.017 Cathode Characteristics Luminous Red/ Blue Sensitivity White Radiant Index Ratio (CS 5-58) (R-68) Typ. Typ. Typ. Min. Typ. (A/lm) (A/lm) (mA/W) 60 150 60 150 350 60 150 60 150 80 200 80 200 500 80 200 80 200 9.5 -- 9.5 -- -- 9.5 -- 9.5 -- -- 0.25 -- 0.25 0.4 -- 0.25 -- 0.25 80 65 80 65 78 80 65 80 65 NOTE: A BA: Bialkali, MA: Multialkali B K: Borosilicate glass, U: UV glass C MC: Metal channel D The maximum average anode current is defined as 5 % of divider current when standard high voltage is applied. Figure 2: Typical Gain 108 TPMHB0690EC Figure 3: Time Response (Example) TPMHB0331EA 107 H8711 H8711-03 106 H8711-10 H8711-13 OUTPUT VOLTAGE (2 mV/div.) GAIN 105 H8711-11 H8711-14 H8711-20 H8711-01 H8711-04 SUPPLY VOLTAGE : -800 V RISE TIME : 835 ps FALL TIME : 2047 ps WIDTH : 1658 ps RL : 50 104 103 TIME (2 ns/div.) 102 500 600 700 800 900 1000 SUPPLY VOLTAGE (V) Figure 4: TTS Characteristic (Example) TPMHB0314EB 104 SUPPLY VOLTAGE: - 800 V FWHM: 310 ps FWTM: 631 ps RELATIVE COUNTS 103 102 101 100 TIME (0.5 ns/div.) Anode to Cathode Supply Voltage (V) -800 -800 -800 -800 -800 -800 -800 -800 -800 Luminous Min. Typ. (A/lm) (A/lm) 80 50 80 50 50 20 10 20 10 280 150 280 150 250 70 35 70 35 Anode Characteristics Dark Current Time Response per Channel Gain Rise Transit TTS Time (After 30 min) Time Typ. Max. Typ. Typ. Typ. Typ. (nA) (nA) (ns) (ns) (ns) 3.5 x 106 0.8 x 106 3.5 x 106 0.8 x 106 0.5 x 106 0.9 x 106 0.2 x 106 0.9 x 106 0.2 x 106 Pulse Linearity per Channel 2% 5% Deviation Deviation (mA) (mA) Uniformity Between Each Anode Typ. Max. Type No. 0.8 4 0.83 12.0 0.33 0.5 1 1: 2.5 1: 3 1: 2.5 1: 3 1: 3 1: 2.5 1: 3 1: 2.5 1: 3 1: 4 1: 5 1: 4 1: 5 1: 5 1: 4 1: 5 1: 4 1: 5 H8711 H8711-01 H8711-03 H8711-04 H8711-20 H8711-10 H8711-11 H8711-13 H8711-14 0.4 2 0.83 12.0 0.33 1.5 3 VOLTAGE DISTRIBUTION RATIO AND SUPPLY VOLTAGE Electrodes K Dy1 Dy2 Dy3 Dy4 Dy5 Normal Divider Type 2 2 2 1 1 Tapered Divider Type 2.4 2.4 2.4 1 1 Supply Voltage: -800 V, K: Cathode, Dy: Dynode, P: Anode ... 1 ... 1 1 ... 1 Dy9 1 1 Dy10 1 1 Dy11 Dy12 P 1 1 1.2 2.4 Figure 5: Pulse Linearity per Channel (Example) 10 TPMHB0691EA 10 TPMHB0692EA PULSE WIDTH: 50 ns REPETITION: 1 kHz SUPPLY VOLTAGE: -800 V PULSE WIDTH: 50 ns REPETITION: 1 kHz SUPPLY VOLTAGE: -800 V DEVIATION (%) Divider Ratio 2:2:2 :1::1:1:1 DEVIATION (%) 0 0 Divider Ratio 2.4 : 2.4 : 2.4 : 1 : : 1 : 1.2 : 2.4 -10 -10 -20 -20 10-2 10-1 100 101 10-2 10-1 100 101 OUTPUT CURRENT (mA) OUTPUT CURRENT (mA) H8711 Figure 6: Anode Cross-talk (Example) 0.1 0.5 0.1 * 0.8 100 0.3 * 0.1 0.3 0.1 * * * * * H8711-10 Supply Voltage: -800 V Light Source: Tungsten Lamp (uniform DC light) Spot Illumination: 4 mm x 4 mm MULTIANODE PHOTOMULTIPLIER TUBE ASSEMBLIES H8711 SERIES Figure 7: Dimensional Outline and Basing Diagram (Unit: mm) 9.3 8.7 0.3 4 3 2 1 POM CASE 4- 0.3 GUIDE MARKS 0.3 PMT: R7600-M16 SERIES DIVIDER ASSEMBLY 2.54 7.62 DY 12.7 GND -HV 4-SCREWS (M2) 30.0 0.5 25.7 18.1 P1 P8 8.7 9.3 P9 P16 2.54 16 15 14 13 5.08 GND 4.5 18.1 25.7 TOP VIEW GUIDE MARK 3 2 4.5 0.8 MAX. 45.0 0.8 2.8 2.54 2.54 x 7=17.78 SIDE VIEW BOTTOM VIEW GND DY12 OUTPUT THROUGH HOLE (NO CONNECTION) -HV INPUT -HV TERMINAL PINS ( 0.46) BBL-TYPE, SAMTEC DY12 OUTPUT TERMINAL PINS ( 0.46) BBL-102, SAMTEC 0.65 Y ANODE OUTPUTS (P1 to P8) TERMINAL PINS ( 0.46) BDL-108, SAMTEC PIN CONNECTION P1 P2 P3 P4 P5 P6 P7 P8 GND GND GND GND GND GND GND GND X ANODE OUTPUTS (P9 to P16) P9 P10 P11 P12 P13 P14 P15 P16 TERMINAL PINS ( 0.46) GND GND GND GND GND GND GND GND BDL-108, SAMTEC Figure 8: Internal Circuit TERMINAL PINS (BDL-108, SAMTEC) P1 P2 ANODE1 OUTPUT ANODE2 OUTPUT ANODE8 OUTPUT GND GND GND Normal Divider Type R1 to R3 : 360 k R4 to R13 : 180 k R14 : 1 M R15 to R17 : 51 R18 : 10 k C1 to C4 : 0.01 F DIVIDER CURRENT: 347 A at -1000 V (Max. INPUT VOLTAGE) Tapered Divider Type R1 to R3, R13 : 360 k R4 to R11 : 150 k R12 : 180 k R14 : 1 M R15 to R17 : 51 R18 : 10 k C1 to C4 : 0.01 F DIVIDER CURRENT: 355 A at -1000 V (Max. INPUT VOLTAGE) P8 K F DY1 DY2 DY3 DY4 DY5 DY6 DY7 DY8 DY9 DY10 DY11 DY12 P9 TERMINAL PINS (BDL-108, SAMTEC) ANODE9 OUTPUT GND GND GND P15 P16 C4 ANODE15 OUTPUT ANODE16 OUTPUT R14 R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R15 R11 C1 R16 R12 C2 R17 R13 C3 R18 TERMINAL PINS (BBL-102, SAMTEC) GND DY12 OUTPUT TERMINAL PINS (BBL-TYPE, SAMTEC) -HV INPUT GND TPMHA0497ED Figure 9: Suitable Sockets (Unit: mm) SD-108-T-22 x2 pcs (for Anode Output Pins) 20.32 2.54 5.08 1.83 1.32 0.76 Supplied SS-102-T-22 (for GND, DY12 Pin) 2.54 5.08 ASP-24307-02 (for GND, -HV Pin) 2.54 7.62 2.54 7.62 2.54 2.54 2.54 (TYP.) TACCA0263EA TACCA0265EA TACCA0266EA WARNING ~ High Voltage ~ The product is operated at high voltage potential. Further, the metal housing of the product is connected to the photocathode (potential) so that it becomes a high voltage potential when the product is operated at a negative high voltage (anode grounded). Accordingly, extreme safety care must be taken for the electrical shock hazard to the operator or the damage to the other instruments. * PATENT: USA: 5410211 and other(9), GBR: 551767 and other(9), DEU: 69209809 and other(9), FRA: 551767 and other(9), JPN: 3078905 and other(9) WEB SITE www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: usa@hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: info@hamamatsu.de France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: infos@hamamatsu.fr United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: info@hamamatsu.co.uk North Europe: Hamamatsu Photonics Norden AB: Smidesvagen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: info@hamamatsu.se Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: info@hamamatsu.it TPMH1278E06 3.18 2.54 2.54 0.51 SEPT. 2007 IP |
Price & Availability of H871107
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |